API 1104 Exam Preparation

Q:- What is the range of thickness of base metals that AWS D1.1 covers?

Posted on


1. All thicknesses
2. All thicknesses exceeding 1/8 inch
3. Only thicknesses between 1/8 inch and 1 inch
4. Thicknesses of 1/8 inch and greater

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions, AWS CWI Questions and tagged , , , , , , , , , , , .

Q:-What test specimens are required?

Posted on


A. side bends tests
B. 1 face bend and 1 root bend
C. 1 T-joint break
D. 2 side bends and 2 root bends
E. None of the above

This entry was posted in API 1104 Exam Preparation, Interview Questions and Answers and tagged , , , , , , , .

Q:- Welding inspection personnel shall be qualified by:

Posted on


1. American Welding Society
2. American Society for Nondestructive Testing
3. American Petroleum Institute
4. American Society of Mechanical Engineers
5. experience and training for the specified inspection task they perform

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions and tagged , , , , .

Q:- Open corner joint is one of the following

Posted on


  1. BUTT WELD
  2. FILLET WELD
  3. PLUG WELD
  4. SPOT WELD

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions, AWS-CWI part B question, Interview Questions and Answers, Questions Answer for AWS D1.1, Welding Interview Questions Answers‎ and tagged , , , , .

Q:- The dip transfer mode. Of metal transfer uaed for mig/ mag welding is characteristics by

Posted on


1. Giving deep penetration
2. Being suitable for position welding
3. Giving low spatter
4. All of the above

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions, AWS-CWI part B question and tagged , , , , .

Q:- What does the term high frequency mean when referring to TIG Welding?

Posted on


A. A high integrity weld is easily achievable 

B. The power source gives a high duty cycle 

C. A high voltage spark is used to initiate the arc 

D. The output from the power source is high

This entry was posted in API 1104 Exam Preparation, AWS CWI Questions, AWS-CWI part B question, Questions Answer for AWS D1.1 and tagged , , , , , , , , , , , , , , , .

Q:-Cast and helix are terms that refers to

Posted on Updated on


A. Ingredients in the flux coating
B. Bead deposition techniques for distortion control
C.quality of the welding wires
D. Sources from which wires are drawn

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions, AWS CWI Questions and tagged , , , , , , , , , , , , , , , , .

Q:- Undercutting adjacent to the final bead on the outside of production pipe welds shall:

Posted on


1. Not be permitted
2. Not be more than 1/32 inch or 12.5% of the pipe wall thickness, whichever is smaller
3. Not be more than 1/8 inch or 6% of the pipe wall thickness, whichever is smaller
4. Always be acceptable if the inspector does not see it
5. None of the above

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions, AWS CWI Questions and tagged , , , , , , , , , , , , , , , .

Q:- When automatic or semiautomatic welding is used, which of the following shall be removed by grinding before welding over them?

Posted on


1. Surface Porosity Clusters
2. Bead Starts
3. High Points
4. All of the above
5. None of the above

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions, AWS CWI Questions and tagged , , , , , , , , , .

Q:- In a fillet weld fracture test the specimen is broken with

Posted on


1. The fillet weld in tesnsion
2. The fillet weld in compression
3. No specific method need to be adapted
4. Suitable machining

This entry was posted in API 1104 Exam Preparation, AWS CWI Exam Part B Practical Questions, AWS CWI Questions and tagged , , , , , , , , , , , , , , , , .