sample cwi fundamentals examination

Q:- To BS 499 part 2, which of the following is true for a welding symbol?

Posted on


1. This or arrow side of the joint goes on top of the reference line
2. This or arrow side of the joint goes below the reference line
3. This or arrow side of the joint goes in the middle of the reference line
4. All of the above

Advertisements

Q:-When considering the advantages of site RT over UT which of the following applies?

Posted on


1. A permanent record produced, good for detecting defects which do not have significant depth in relation to axis of the X-ray beam and defect identification
2. A permanent record produced, good for detecting all surface and sub-surface defects and assessing the through thickness depths of defects
3. A permanent record produced, defect identification not so reliant on operator skill
4. No controlled areas required on site, a permanent record produced and good for assessing the extent of pipe wall thickness reductions due to internal corrosio

Q:- For welder qualification, the specimens shall be prepared for tensile-strength, nick-break, and bend tests. When tensile-strength tests are omitted:

Posted on


1. The welder is not qualified
2. The weld must be redone
3. The is not covered in API 1104
4. Tensile-Strength specimens shall be subject to the nick-break test
5. Extra face bends must be tested